HP Officejet Pro 8500 - Manual (Page 50)

7. Open the Paper Type/Quality panel.
8. Click the Paper tab, and then select the media type from the Paper type drop-
down list.
NOTE: Borderless printing is not supported on plain media.
9. If you are printing photos, select Best from the Quality drop-down list.
Alternatively, select Maximum dpi, which provides up to 4800 x 1200 optimized dpi.
NOTE: Up to 4800 x 1200 optimized dpi for color printing and 1200 input dpi.
This setting might temporarily use a large amount of hard disk space (400 MB
or more) and will print more slowly.
10. Select the media source.
11. Change any other print settings, and then click Print.
12. If you printed on photo media with a tear-off tab, remove the tab to make the
document completely borderless.
Chapter 3
46 Use the device