HP XP Racks - Manual (Page 59)

3. From the Actions menu, click Remote Replication > View Pair Properties and review Status.
For more information, see “Pair status definitions” (page 60) .
Procedure 15 To monitor license capacity
• See the Summary area in the Replications window.
How pair status changes
The primary system changes and maintains the status of the P-VOL and is responsible for keeping
the P-VOL and its S-VOL synchronized. The secondary system maintains the status of the S-VOL.
•
The primary system can change the status of the P-VOL and S-VOL.
•
The secondary system can change the status of the S-VOL but not the P-VOL. When an operation
is performed from the secondary system, the primary system detects a status change in the
S-VOL and then changes P-VOL status accordingly.
•
The status indicates the state of the volume or pair:
When a pair is started, the secondary system changes the status of the P-VOL and S-VOL
to COPY. When the initial copy operation is complete, the primary system changes the
status of both volumes to PAIR. ◦
◦ When you split a pair, the system changes the status of the P-VOL and S-VOL to PSUS.
◦ When a pair is suspended due to an error condition, the primary/secondary system
changes the P-VOL and S-VOL status to PSUE.
Monitoring pair status, license capacity 59