HP XP Racks - Manual (Page 133)

Description Item
• Pair Position: Whether volume is a P-VOL or S-VOL.
•
Emulation Type: Volume's emulation type.
• Capacity: Volume's capacity.
•
CLPR: Volume's CLPR.
Type of pair: Copy Type
• Cnt Ac-S: Continuous Access Synchronous
•
Cnt Ac-S Z: Continuous Access Synchronous Z
Pair status. Status
Information about the remote system. Remote Storage System
•
Model / Serial Number: Model and serial number.
•
SSID: SSID number. Cnt Ac-S Z only.
• LDEV ID: LDEV identifier.
Cnt Ac-S only. Path Group ID
Path group identifier.
Pair's consistency group identifier. CTG ID
Whether the consistency group is shared by multiple storage systems. CTG Utilization
• Single: The consistency group consists of a single pair of primary and
secondary storage systems.
•
Multi: The consistency group consists: The consistency group consists of
multiple storage systems.
Cnt Ac-S Z only. Preserve Mirror Status
Preserve mirror status.
P-VOL fence level. Fence Level
Setting Fields
Description Item
Cnt Ac-S only. Secondary Volume Write
Whether the S-VOL can be written to while the pair is split.
•
Enable: Can write to S-VOL. Available only when performing the split
operation from the pair's primary storage system.
• Disable: Prevents writing to S-VOL. Default.
Whether the P-VOL can be written to while the pair is split. Primary Volume Write
•
Depend on Primary Volume Fence Level: Writing to P-VOL depends on the
Primary Volume Fence Level Setting. Default.
• Disable: Prevents writing to the P-VOL. Available only when performing the
split operation from the pair's primary storage system.
Cnt Ac-S Z only. SSB Transfer (F/M=FB)
Whether to report SSB (sense byte) to the host. Enable/Disable (the default).
Enable is available only when performing the split operation from the pair's
primary storage system.
Split Pairs wizard 133