HP OneView for Red Hat Enterprise Virtualization - Manual (Page 17)

•
Source—The IP address/hostname of the device that generated the event.
•
Date and Time—The time of the event (in both local time and GMT).
To delete a message, select it, and click Delete.
Host tab
To view inventory and status information about the selected host, click the Host tab. The Host
information tables are displayed.
Host Information
The Host Information table contains:
•
Server Name—The server name defined by the host operating system or defined in the iLO
GUI.
•
Product—The product name of the selected host.
•
UUID—The universally unique identifier assigned when the system is manufactured.
•
Serial Number—The server serial number, which is assigned when the system is manufactured.
•
iLO Address—The network IP address of the iLO subsystem.
•
iLO License—The level of licensed iLO functionality.
•
iLO Firmware—The version and date of the installed iLO firmware.
•
Host Power Status—ON, OFF.
•
UID Light—The state of the UID (ON, OFF, FLASHING).
•
CPUs—The number of populated CPU sockets in the host.
•
Memory—The total amount of RAM in the host.
•
NICs—The number of available network interfaces on the motherboard. This does not include
PCIe cards or MEZZ cards.
•
System ROM—The host BIOS type and date.
•
Backup ROM—The host backup BIOS type and date.
Server Power
The Server Power table contains (all values in Watts):
•
Present Power Reading—The current power being consumed by the host.
•
Average Power Reading—The average measured power reading for the specified time period.
If the server has not been running for the specified time period, the value is the average of all
readings since the server was booted.
•
Minimum Power Reading—The least measured power reading for the specified time period.
If the server has not been running for the specified time period, the value is the minimum
reading since the server was booted.
•
Maximum Power Reading—The highest measured power reading for the specified time period.
If the server has not been running for the specified time period, the value is the highest reading
since the server was booted.
DIMMs
The DIMMs table contains, for each DIMM socket:
•
Socket—The label and location of the DIMM on the motherboard.
•
Size—The DIMM capacity in MB.
•
Speed—The DIMM speed in MHz.
CPU Information
Host tab 17