beautypg.com

Removing the connector cover – HP StoreEver LTO Ultrium Tape Blades User Manual

Page 32

background image

5.

Remove the connector cover on the rear of the Tape Blade assembly. Release the back of the
cover (1) and pull the cover away from the Tape Blade (2).

Figure 14 Removing the connector cover

.

CAUTION:

To prevent damage to the backplane connector, take special care when handling the Tape
Blade assembly. If the Tape Blade is installed with a damaged connector, the enclosure
backplane may also be damaged.

Installing an HP StorageWorks Tape Blade

32

See also other documents in the category HP Storage: