HP StoreEver LTO Ultrium Tape Blades - Manual (Page 26)

4. Remove the connector cover on the rear of the Tape Blade assembly. Release the back of the
cover (1) and pull it away from the Tape Blade (2), as illustrated in
Figure 8 .
Figure 8 Removing the connector cover
.
CAUTION:
To prevent damage to the backplane connector, take special care when handling the Tape
Blade assembly. If the Tape Blade is installed with a damaged connector, the enclosure
backplane may also be damaged.
Installing an HP StorageWorks Tape Blade 26