HP Tower Uninterruptible Power System - Manual (Page 81)

Configuration and operation 81
Reconfiguring the HPPP Administrator and Client power sources
To reconfigure the HPPP Administrator power source:
1. Connect the new power source using a USB or serial cable to the HPPP Administrator.
2. Open the HPPP Administrator web interface, and then select Settings>Device Discovery.
3. Click Quick scan to discover the new power source.
4. Select the new power source from the Node List, and then click Configure power source.
The Change Power Source screen appears.
5. Click Yes to replace the current power source.
6. Select the old power source from the Node List, and then click Remove node.
The Remove node screen appears.