HP Spectre ONE 23-e010se All-in-One CTO Desktop PC - Manual (Page 54)

4. Press and hold the Connect button (3) for 5 to 10 seconds, until the LED on the receiver lights
up or stops flashing.
5. Press and hold the Connect button (4) for 5 to 10 seconds, until the LED on the receiver lights
up or stops flashing.
Audio problems
No sound is produced
● Be sure that you connected powered speakers and that they are turned on.
● Adjust the volume, either on the speakers or through the computer operating system.
● Turn off your computer, and then unplug and reconnect the speakers. Be sure that the speakers
are properly connected.
● Unplug headphones if they are connected to your computer (or speaker system).
● If the computer is in the Sleep state, exit Sleep by briefly pressing the power button.
● Check the audio functions.
48 Chapter 10 Troubleshooting