Recovering using hp recovery manager, What you need to know, Recovering – HP Spectre ONE 23-e010se All-in-One CTO Desktop PC User Manual
Page 47
To remove everything and reinstall Windows from the Start screen:
1.
On the Start screen, point to the far-right upper or lower corner of the screen to display charms.
2.
Click Settings.
3.
Click Change PC settings in the bottom right corner of the screen, and then select General
from the PC settings screen.
4.
Under Remove everything and reinstall Windows, select Get started, and follow the on-
screen instructions.
Recovering using HP Recovery Manager
HP Recovery Manager software allows you to recover the computer to its original factory state. Using
the HP Recovery media you created, you can do a Factory Reset. This restores the computer to the
state it originally came in from the factory. All hard drive information is wiped out and the partitions
are re-created.
The HP Recovery partition (select models only) allows Minimized Image Recovery.
What you need to know
●
HP Recovery Manager recovers only software that was installed at the factory. For software not
provided with this computer, you must either download the software from the manufacturer's
website or reinstall the software from the media provided by the manufacturer.
●
Recovery through HP Recovery Manager should be used as a final attempt to correct computer
issues.
●
HP Recovery media must be used if the computer hard drive fails or if all attempts to correct any
functional computer issues fail.
●
If the HP Recovery media do not work, you can obtain recovery media for your system from the
HP website. For U.S. support, go
or worldwide support, go
to
.
IMPORTANT:
HP Recovery Manager does not automatically provide backups of your personal
data. Before beginning recovery, back up any personal data you want to keep.
Starting HP Recovery Manager from the HP Recovery partition
1.
Press
f11
while the computer boots.
– or –
Press and hold
f11
as you press the power button.
NOTE:
If
f11
does not work, then press the
fn
+
f lock
keys, this will allow you to use
f11
with the
power button.
2.
Select Troubleshoot from the boot options menu.
3.
Select HP Recovery Manager, and follow the on-screen instructions.
Restore and recovery
41