HP Z1 G2-Workstation - Manual (Page 37)

Adjusting the audio signal
● There is no hardware volume control on the HP Z1 G2 Workstation. (However, some keyboards
do have volume buttons, usually in the upper-right corner.)
● Volume can be adjusted with the operating system (OS) master control or the software (SW) audio
player control.
● The OS master control and SW audio player control are independent. However, they are both
simultaneously active and affect the overall volume of the audio signal.
● If the audio signal is not audible, check the OS master control and SW audio player control to be
sure that neither is set too low.
Using the webcam
The webcam works automatically with any webcam software.
A white activity light is on when the webcam is active. Optimal performance of the fixed-focus lens is at
0.5 meters.
A dial at the top of the workstation lets you perform the following tasks:
● Adjust the camera angle.
● Disable the camera by turning the dial all the way toward the front of the workstation. A red stripe
in the camera viewport indicates the lens is pointing straight down into the chassis. The user is not
visible.
Installing optional components
You can install additional components such as memory, hard drives, and wireless modules in your
workstation.
● To view component installation videos, go to http://www.hp.com/go/sml .
● For installation guidelines and technical information, refer to the Maintenance and Service Guide
at http://www.hp.com/support/workstation_manuals .
Security
You can secure your workstation by attaching a lock to the security cable slot. The workstation includes
several security features to reduce the risk of theft and to warn of chassis intrusion. Refer to the
Maintenance and Service Guide for information about additional hardware and software security
features available for your system.
Product recycling
HP encourages customers to recycle used electronic hardware, HP original print cartridges, and
rechargeable batteries.
Adjusting the audio signal 29