HP Z1 G2-Workstation - Manual (Page 20)

Setup procedure
1. The HP Z1 G2 Workstation weighs 19.2 kg (42.3 lbs) for the non-touch model and 21.0 kg (46.3
lbs) for the touch model, and must be removed from the box by two people.
WARNING! If a product is shipped in packaging marked with this icon , the product must
always be lifted by two people to avoid personal injury due to product weight.
WARNING! To reduce the risk of electric shock or damage to your equipment:
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the computer by unplugging the power cord from the AC outlet (not
by unplugging the power cord from the computer).
If your power cord has a 3-pin attachment plug, plug the cord into a grounded (earthed) 3-
pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin
adapter. The grounding pin is an important safety feature.
For more safety and regulatory information, refer to the Regulatory, Safety and Environmental
Notices located with the user guide on your computer.
2. Push the unit down to its lowest horizontal position.
CAUTION: Never open the unit unless it is in the lowest horizontal position. Otherwise, system
components may be damaged.
12 Chapter 3 Setting up and using the workstation