HP OneView for Microsoft System Center - Manual (Page 58)

HP BladeSystem Management Pack (v 1.x) for System Center
NOTE: This management pack is not required if you are using the HP BladeSystem Management
Pack (v 2.0 or later) for System Center.
Support Category
The SCOM environment must have one of the following
Microsoft System Center products available: System Center Products
• Operations Manager 2007
•
Operations Manager 2007 SP1
•
Operations Manager 2007 R2
• Operations Manager 2012
•
Operations Manager 2012 SP1
Not applicable for managed enclosures. Operating Systems
Not required. ProLiant Support Pack
The following HP BladeSystem c-Class enclosures are
supported for management: Hardware Dependencies
•
HP BladeSystem c3000 Enclosure
•
HP BladeSystem c7000 Enclosure
HP recommends Onboard Administrator firmware version
3.30 or greater.
The following management packs must be imported:
• HP ProLiant Server Management Pack for System Center
The following HP SCOM Management Packs features must
be installed in the SCOM environment:
Other Dependencies
• HP BladeSystem Enclosure Monitor Service
•
HP BladeSystem Enclosure Monitor Manager
58 HP BladeSystem Management Pack (v 1.x) for Microsoft System Center Support Information