HP StoreEver DAT Tape Drives User Manual
Page 38
Operating your tape drive
38
There are two LEDs, labeled Tape and Clean. The meaning of different patterns of LEDs is as
follows:
Tape LED
Clean LED Meaning
on
off
The cartridge is loaded and the drive is ready.
flashing
slowly
off
The cartridge is loading or unloading, or self-test is in
progress.
flashing
rapidly
off
The cartridge is loaded, activity is occurring.
off or
flashing
on
This is the Error Condition Signal.
HP StorageWorks DAT drives perform a
comprehensive self-test during power-up. If a hard
error causes the self-test to fail, the clean light changes
to steady amber. Run HP Library & Tape Tools to help
diagnose the problem.
off or
flashing
flashing
slowly
This is the Media Caution Signal.
1 Wait for the current operation to finish, then insert
a different tape and repeat the operation that was
being performed.
2 If the media caution signal does not show this time,
it indicates that the original cartridge was nearing the
end of its useful life. Copy any data you want to keep
from the original tape onto a new tape if possible,
then discard the old tape.
3 If the media caution signal appears again with the
second tape, the tape heads need cleaning.
4 If the media caution signal appears after using a
cleaning cartridge, the cleaning cartridge has
probably expired and should be discarded.
flashing
slowly
flashing
slowly
When the two LEDs flash alternately, the tape drive is
in disaster recovery mode, restoring the operating
system (see ”
any
any