Removing a device – HP StorageWorks Data Replication Manager Software User Manual
Page 108
•
, presented in
“Configuring the HP StoreOnce Enterprise
•
“Modifying the polling interval or IP address of an HP StoreOnce device” (page 108)
•
“Removing a device” (page 108)
Modifying the polling interval or IP address of an HP StoreOnce device
1.
From the Administration section of the Navigation tree, select Device Management.
2.
Select the device to be modified.
3.
Click Modify.
The Modify Device Information dialog box appears.
4.
Select the appropriate interval from the Polling Interval field.
5.
If required, change the IP address by highlighting the current IP address and then typing in
the correct information.
If you are modifying the polling interval or IP address of an HP StoreOnce B6000-series device,
you must enter the user ID and password as authentication.
6.
Click Apply.
The updated polling interval appears in the Polling Interval (in minutes) column for that device.
Removing a device
To remove a device:
1.
From the Administration section of the Navigation tree, select Device Management.
2.
Select the device to be removed.
3.
Click Remove.
A warning dialog box appears.
4.
Click Yes.
A confirmation dialog box appears.
108 Performing administration procedures