HP CD-Writer Plus Internal 8110i Drive - Manual (Page 24)

Installing a CD-Writer Plus in an Empty Drive Bay 1-15
C
h
a
p
te
r 1
:
In
st
a
lli
n
g
C
D
-
W
rit
e
r P
lu
s
a
n
d
S
o
ft
w
a
re
17A. If you do not have a sound board or only want to
listen to music discs using headphones or speakers
attached to the front of the CD-Writer Plus, skip
this step and go to step 18A.
You do not need an audio cable to record music.
The audio cable is used only for listening to music
CDs through your computer’s sound system.
When the CD-Writer Plus drive records music or data, it uses the data
cable, not the audio cable.
Using an existing audio cable
If your sound board already has a spare audio cable with an MPC-2
connector (shown above), plug the MPC-2 connector it into the Audio
Out opening on the back of the CD-Writer Plus drive.
Using the audio cable provided with your CD-Writer Plus
To use the audio cable that came with your CD-Writer Plus, first plug the
end with only one connector to the Audio Out opening on the back of
the CD-Writer Plus drive.
MPC-2 connector
Audio
cable