HP CD-Writer Plus Internal 8110i Drive - Manual (Page 14)

Installing a CD-Writer Plus in an Empty Drive Bay 1-5
C
h
a
p
te
r 1
:
In
st
a
lli
n
g
C
D
-
W
rit
e
r P
lu
s
a
n
d
S
o
ft
w
a
re
Installing the Hardware
CAUTION: The discharge of static electricity can damage electronic circuitry.
You can avoid static discharge by touching a grounded metal object such as
your computer’s case before and during installation of hardware inside your
computer or by wearing a grounding strap connected to ground.
1A. After getting the Install Recommendation (see the previous section) you
will be prompted to shut down Windows. Click the Shutdown button
and wait until it is safe to turn off your computer. Proceed to turn OFF
your computer, monitor, and other devices.
2A. Unplug the power cords from the wall outlet or from the power strip, if
you use one.
3A. Remove the cover from your computer
CAUTION: Be careful of any sharp edges that may be present inside your
computer.
See your computer’s
manual if you need help
removing the cover.
Computer OFF