HP Designjet Z3200 PostScript Photo Printer series - Manual (Page 51)

NOTE: The printer may not cut the paper immediately, as the printheads are serviced after each print
and the paper cannot be cut until that process is complete.
When the paper has been cut, remove the cut piece from the output tray.
TIP: If strips or short prints are left in the output tray the printer could jam.
TIP: Photo and coated paper requires careful handling, see The print is scuffed or scratched
on page 124 .
ENWW Feed and cut the paper 41
P
ape
r ha
n
d
lin
g