beautypg.com

Fron t-panel e rrors, Enww 151 – HP Designjet Z3200 PostScript Photo Printer series User Manual

Page 161

background image

Message

Recommendation

Replace [color] cartridge

Replace the cartridge. See

Handling ink cartridges and

printheads on page 81

.

Reseat [color] cartridge

Remove and reinsert the same cartridge. See

Handling ink

cartridges and printheads on page 81

.

Update: failed. Invalid file

Make sure that you have selected the correct firmware update
file. Then try again to perform the update.

Table 15-2

Numerical error codes

Error code

Recommendation

52:01

The printer needs internal cleaning. See

Clean the printhead drop detector on page 140

. If the

problem persists, contact HP Support. See

Contact HP Support on page 154

.

61:01

The file format is wrong and the printer cannot process the job. The printer expects jobs to be
sent in PCL3 format.

62, 63, 64, 65, 67

Check that the printer cables are well connected and the USB cable is of good quality. Try again
to print the same file. Make sure you are using the correct driver for your printer. Update your
printer's firmware. See

Update the firmware on page 98

.

74.1

Try the firmware update again. If possible, try to update over a network if the USB update failed.
Do not try to use your computer while the update is in progress. If the problem persists, contact
HP Support. See

Contact HP Support on page 154

.

75

A printer maintenance kit is required. See

Printer maintenance kits on page 99

.

78

You may be trying to print borderless on a paper type that does not support it. See

Print with

no margins on page 49

.

79

Restart the printer. If the problem persists, update your printer's firmware. See

Update the

firmware on page 98

. If the problem still persists, contact HP Support. See

Contact HP

Support on page 154

.

81, 86, 87

There may be a paper jam. See

The paper has jammed on page 115

. If the problem persists,

contact HP Support. See

Contact HP Support on page 154

.

94, 94.1

Restart color calibration. See

Color calibration on page 60

.

98

There may be a printhead problem. See

Troubleshooting ink cartridge and printhead issues

on page 137

.

any other codes

Restart the printer. If the problem persists, contact HP Support. See

Contact HP Support

on page 154

.

Table 15-1

Text messages (continued)

ENWW

151

Fron

t-panel

e

rrors