HP Designjet Z3200 PostScript Photo Printer series - Manual (Page 44)

Paper menu procedure
You can also unload a sheet from the Paper menu.
1.
Select the Paper menu icon .
2. Select Unload paper. The sheet unloads out of the front of the printer, either catch it manually or
allow it to fall into the basket.
View information about the paper
To view the loaded paper information, press the View loaded paper key on the front panel.
You can also select the Paper menu icon and then View loaded paper.
The following information is displayed on the front panel:
● Roll or sheet status
● Paper type you have selected
● Width of the paper (estimated)
● Length of the sheet (estimated)
● Color calibration status
● Paper advance calibration status
NOTE: If you loaded a cut sheet with no skew check, the estimated length should be disregarded
because the printer cannot estimate it accurately.
If no paper is loaded, the message Out of paper is displayed.
The same information (apart from the color and paper advance calibration status) is displayed in the HP
Printer Utility, on the Supplies page.
34 Chapter 4 Paper handling ENWW
P
ape
r ha
n
d
lin
g