HP Designjet Z3200 PostScript Photo Printer series User Manual
Page 41
2.
Insert the sheet into the feeder. Load your sheet aligned with the load line and insert until the paper
will not continue, with thicker sheets you feel resistance. The printer detects the sheet in three
seconds. A countdown begins on the front-panel display.
CAUTION:
Do not push your fingers inside the printer's paper path.
3.
After the countdown, the paper feeds into the printer. Guide the sheet into the printer; this is
especially important with thicker papers.
4.
The front-panel display asks whether you are loading a roll, a sheet with skew check, or a sheet
without skew check. Select Sheet, with skew check or Sheet, without skew check with the
Up
and
Down
keys.
NOTE:
The recommended option is Sheet, with skew check.
NOTE:
If you load without a skew check, print previews may not work properly. See
5.
Select your paper category and type.
TIP:
If you have loaded a paper type whose name does not appear in the paper list, see
paper type is not in the driver on page 113
ENWW
Load a single sheet
31
P
ape
r ha
n
d
lin
g