HP rp5700 Point of Sale System User Manual
Page 17

7.
To communicate with the printer, press the paper feed button using either short or long clicks.
Use a long click for “yes” (more than one second) and a short click for “no.” Follow the printed
instructions to make selections.
8.
Continue through your menu selections until you are prompted, Save New Parameters?. Select
“Yes” or “No.”
a.
If you wish to save, select Yes, then return DIP Switch 1 to the OFF position (up).
b.
Open the receipt cover.
c.
Press and hold the paper feed button while closing the receipt cover.
d.
The diagnostic printout verifies your new settings.
9.
If you would like to continue configuring the printer, select No. The printer then returns to the
configuration menu, where you can set parameters again.
The following is a sample printer configuration menu.
ENWW
Entering the Configuration Mode
11