Figure d-5, View of two fcsas at the rear of the server – HP Integrity NonStop H-Series User Manual
Page 78
Installing and Configuring the 9840FC Tape Drive for
the NonStop NS-Series Server
9840 (CT9840FC-3) Installation and User’s Guide for the NonStop S-Series Enclosure— 524959-003
D- 6
Installation
3. Attach the power cord to the tape drive’s AC power receptacle (see
page D-3 for location), and then plug the other end into an AC power outlet.
4. Power on the tape drive (see
on page D-3 for power switch location),
and then wait for it to perform its power-on self-test (POST).
Figure D-5. View of Two FCSAs at the Rear of the Server
Note. The tape drive does not have protection against lightning surges. Customers in high risk
areas should use external surge protection rated for use in their location and be able to handle
the power demand of the tape drive.