Loading a tape cartridge, Figure 4-1, 9840 tape cartridge – HP Integrity NonStop H-Series User Manual
Page 43
Operating the Tape Drive
9840 (CT9840FC-3) Installation and User’s Guide for the NonStop S-Series Enclosure— 524959-003
4 -5
Loading a Tape Cartridge
Figure 4-1. 9840 Tape Cartridge
Loading a Tape Cartridge
1. Insert the tape cartridge in the tape drive. See
2. Wait for a displayed message:
a. A “Ready F” (File Protect) message means that tape is loaded and is
write protected.
b. A “Ready U” (File Unprotected) message means that tape is loaded and
is not write protected.
c. A “Load XXXX” message means that the tape load failed, where the
“XXXX” is a Fault Symptom Code. For instructions on how to handle this
condition, see
on page A-3, in Appendix A.
1.
Manufacturer label area (yellow on VolSafe Cartridge)
2.
Customer label
3.
Write-protect switch (yellow on VolSafe Cartridge)
4.
Finger grips
5.
VOLSER label area
6.
Media ID (machine identifiable, yellow on VolSafe Cartridge)