HP Ethernet 10Gb 2-port 530T Adapter User Manual
Page 38

Scripting mode 38
[No.7 Target Parameters]
;Enable/Disable Target Establishment:
Connect = < Enabled | Disabled > ; Current = Disabled
;Configure WWPN:
WWPN = < String (0 to 16 Chars) > ; current = 0000000000000000
;Configure target Boot LUN number:
Boot LUN =
[No.8 Target Parameters]
;Enable/Disable Target Establishment:
Connect = < Enabled | Disabled > ; Current = Disabled
;Configure WWPN:
WWPN = < String (0 to 16 Chars) > ; current = 0000000000000000
;Configure target Boot LUN number:
Boot LUN =
[Section NIC Partition Configuration]
;Enable or Disable NIC Partition Function:
NIC Partition = < Enabled | Disabled > ; Current = Disabled
This manual is related to the following products: