HP Ethernet 10Gb 2-port 530T Adapter - Manual (Page 30)

Scripting mode 30
Log file
The -set operation logs the following information for each device:
• The difference between configuration file and current configuration on the card
• Any syntax errors detected while parsing the script file
• Any error and warning while trying to set the value such as invalid value
The log file name is .log. The log is formatted in conformance with the
scripting file format. Error and warning messages start with a semicolon so you can use the log file as a
configuration file. Use the -stderr command option to output the log file content to STDERR at the same
time.
Script command example
The following examples show ways to use the -list, -get, -set, and -getItemGuide operations.
-list operation
C:\test\7.8.21>ccmcfg32 -list
Card# BUS Device Config MAC Address
====== ========= ========= ====== =================
0 1:00:00 BCM57712 IFA 00:10:18:6F:D2:74
1 1:00:01 BCM57712 IFA 00:10:18:6F:D2:76
2 2:00:00 BCM57810 IFNA 00:10:18:C7:5F:60
3 2:00:01 BCM57810 IFNA 00:10:18:C7:5F:62
4 3:00:00 BCM5717 I 00:00:00:00:00:00
5 3:00:01 BCM5717 I 00:00:00:00:00:00
6 4:00:00 BCM5722 I B8:AC:6F:93:86:BA
7 5:00:00 BCM5720 I 00:10:18:57:20:00
8 5:00:01 BCM5720 I 00:10:18:57:20:01
*: Configure Block Letters: I:iSCSI; F:FCoE; N:Nic Partition; A:AFEX
-get operation
The following example dumps the configuration of each device into a file named
digits]>.CFG.
C:\test\7.8.21>ccmcfg32 -get
Dumping Configuration of Device [00:10:18:6F:D2:74] to 186FD274.CFG ...done.
Dumping Configuration of Device [00:10:18:6F:D2:76] to 186FD276.CFG ...done.
Dumping Configuration of Device [00:10:18:C7:5F:60] to 18C75F60.CFG ...done.
Dumping Configuration of Device [00:10:18:C7:5F:62] to 18C75F62.CFG ...done.
Dumping Configuration of Device [00:00:00:00:00:00] to 00000000.CFG ...done.
Dumping Configuration of Device [00:00:00:00:00:00] to 00000000.CFG ...done.
Dumping Configuration of Device [B8:AC:6F:93:86:BA] to 6F9386BA.CFG ...done.
Dumping Configuration of Device [00:10:18:57:20:00] to 18572000.CFG ...done.
Dumping Configuration of Device [00:10:18:57:20:01] to 18572001.CFG ...done.
The following example dumps the configuration of all devices in the platform into a single file named
outdata.txt.
C:\test\7.8.21>ccmcfg32 -get outdata.txt
Dumping Configuration of Device [00:10:18:6F:D2:74] to outdata.txt ...done.
Dumping Configuration of Device [00:10:18:6F:D2:76] to outdata.txt ...done.
Dumping Configuration of Device [00:10:18:C7:5F:60] to outdata.txt ...done.