HP Ethernet 10Gb 2-port 530T Adapter - Manual (Page 10)

Menu mode 10
Parameters that take effect after rebooting
If you invoke CCM from a DOS, Windows, or Linux environment instead of the option ROM, some
parameters take effect when you reboot the computer, such as the Hardware Configuration menu
parameters. When you change and save parameters in these menus, a prompt appears reminding you to
reboot the computer.
Device Hardware Configuration menu
The following table describes device hardware configuration options.
Device Hardware
Configuration parameter Parameter option Description
Multi-Function Mode* Appears when a device supports multi-functions
MF Multiple function allowed mode (only applies to
certain devices)
SF Forced single function mode
SPIO4
NPAR NIC partitioning multi-function mode
AFEX VNTag multi-function mode
DCB Protocol Enable/disable DCB protocol