HP Scanjet N6010 Document Sheet-feed Scanner - Manual (Page 20)

To clean the strips of glass, follow these steps:
1.
Disconnect the USB cable and power supply from the scanner.
2. Open the scanner hatch.
3. Clean the glass by using a soft, lint-free cloth that has been sprayed with a mild glass
cleaner.
Caution Use only glass cleaner to clean the scanner glass. Avoid cleaners
that contain abrasives, acetone, benzene, and carbon tetrachloride, all of
which can damage the scanner glass. Avoid isopropyl alcohol because it can
leave streaks on the glass.
Do not spray the glass cleaner directly on the glass. If too much glass cleaner
is applied, the cleaner could leak under the glass and damage the scanner.
4. Dry the glass with a dry, soft, lint-free cloth.
5. When you have finished, reconnect the USB cable and power supply to the scanner.
Use the HP paper-path cleaning cloth
If scanned images have streaks or scratches, use the HP paper-path cleaning cloth to
clean the paper path. A paper-path cleaning cloth is included in the box with the device.
To order a new cleaning cloth see
Order maintenance and scanning supplies .
Follow these steps to clean the paper path:
1.
Open the sealed container, starting at the notch. Take care not to tear the cleaning
cloth that is inside.
2. Remove the cleaning cloth and unfold it.
Chapter 3
18 HP Scanjet N6010 Sheetfeed Document Scanner