HP Netserver E Server series - Manual (Page 86)

Appendix A Customizing the HP Support Anywhere Server Software
82
hardware.
You may reconfigure the restart time in the range 300 seconds (5
minutes) to 1800 seconds (30 minutes) by running ASRUSER /t.
The change will remain in effect even after restarting your
system.
/p Changes the ASR service program polling period. This is the
time interval at which the ASR service program resets the ASR
hardware timer. It must be less than the automatic hardware reset
time. This value is pre-configured to be 300 seconds (5 minutes).
In other words, the service program will reset the hardware timer
every 5 minutes. To change this time, run ASRUSER /p. The
value you choose must be less than the value entered for the
Automatic Hardware Restart time.
/o Gets the current ASR timeout and polling period
/v Gets the version number
/c Prints ASR counter statistics, for installation testing and
verification