HP Netserver E Server series - Manual (Page 50)

Chapter 3 Installing the HP Support Anywhere Software
46
1. Reboot the server and, when prompted, press [F12].
The server displays the Utility Partition Manager.
2. On the Utility Partition Main Menu, cursor to "HP Console Redirection."
The server displays the HP Console Redirection screen.
3. From the popup menu, select "Initialize the modem."
The program supplies a default initialization string (AT&F). This string
includes a group of characters sent to the modem that configure it for
routine operations. Use either the default string supplied by HP, or the
initialization string supplied by the manufacturer of the modem you
connected to the NetServer.
NOTE You can modify the modem initialization string as required.
This string may have been preset by the service personnel who
call in to diagnose problems with the server remotely.
4. The HP Modem Initialization Utility also allows for a case-sensitive
password.