HP Netserver E Server series - Manual (Page 52)

Chapter 3 Installing the HP Support Anywhere Software
48
If you plan to manage your HP NetServer E 40 or E 45 using either a direct
terminal connection or via modem, and you have chosen not to use Symantec's
pcANYWHERE32, make sure your terminal emulation software:
•
Provides remote dial-in and communications features
•
Is correctly configured for console redirection
Regardless of which communications software you use, the following parameters
apply at the server's COM port
Table 3: Communications Parameters
Parameter Required
Baud Rate 19,200
Data Bits 8
Stop Bits 1
Parity None
Handshaking XON/XOFF
Connect Assert DCD
Disconnect Drop DTR
The remote console's display should closely resemble the characteristics of the
server's display if you use a PC-based, ANSI color terminal emulator that
supports 25-line mode and the IBM PC character set. The table below provides
the terminal settings to use when configuring your communications software for
use with HP Remote Console redirection.