HP Netserver E Server series - Manual (Page 57)

Chapter 3 Installing the HP Support Anywhere Software
53
function is suspended until a remote user successfully logs on. The server
remains in this standby state indefinitely until a connection is made, or until you
disable the remote login by pressing the space bar at the server.
At the Remote Console
To initiate a remote management session using pcANYWHERE32:
1. Run pcANYWHERE32 from the pcANYWHERE32 program group in
your Windows Program Manager.
2. Double-click the icon you created for your HP NetServer.
3. Enter the password you defined in the HP NetServer's modem
initialization program.
After the NetServer accepts the password, you have access to both the BIOS setup
routine and to the HP NetServer's Utility Partition.
Graphic Console Redirection (Windows NT)
If you want to access an HP NetServer running Windows NT and your remote
console is running either Windows NT or Windows 95, you can redirect all the
information displayed on the HP NetServer to your remote console using
pcANYWHERE32.
The following figure shows how the Console Redirection is setup.