HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 13)

Commands 13
• Digital Signature Validation (for Virtual Connect firmware version 2.30 and higher)
• Package Version
• Ethernet Firmware Version Timestamp
• Ethernet Firmware Supported Hardware
• FC Firmware Version
• FC Firmware Supported Hardware
• Release Notes (extract, not display)
Item Description
Syntax
vcsu -a packageinfo -l
Parameter:
FILE Full path to the Virtual Connect package on the local computer or supported remote server
Example
Display package information from a file named VCpackage:
vcsu -a packageinfo -l VCpackage
report
Display the current running firmware version on all modules in a specific target enclosure. Also display the
VC-Enet and VC-FC firmware versions provided in the specified VC package file, and whether or not the
module can be updated. In addition to displaying the module firmware version and status, the report
command also displays details about the VC package contents.
Because the package version details appear, the user must provide a VC package file as part of the input at
the command line.
Item Description
Syntax
vcsu -a report -i -u -p -l [-b ]
Parameters:
IP IPv4 address of the active OA in the enclosure*
USER Name of the OA user with privileges to access all enclosure interconnect bays. Minimum length
is 1 character. Maximum length is 40 characters.**
PWD Password of the OA user. Minimum length is 3 characters. Maximum length is 40
characters.**
FILE Full path to the Virtual Connect package on the local computer or supported remote server
BAY Optional. The bay number of the target module. If not specified, the default is all supported
modules.
*In a multi-enclosure environment, this must be the IP address of the active OA in the primary enclosure.
**In a multi-enclosure environment, USER and PWD parameters for the Onboard Administrator must be identical across
local and all remote enclosures in the Virtual Connect domain.
Examples
Display all modules in an enclosure:
vcsu -a report -i 192.168.1.100 -u Administrator -p password -l VCpackage
Display a single module in an enclosure: