HP 3PAR Application Software Suite for Microsoft Exchange Licenses - Manual (Page 105)

Table 6 HP 3PAR Recovery Manager Software for Microsoft Exchange Event Messages (continued)
Description/Action Error Message Event ID
The removevlun operation has failed.
•
Verify that you can connect to the required HP 3PAR Storage System
from the CLI command window.
RME5134: ERROR: removevlun
operation failed. 5134
The createvlun operation has failed.
• Verify that you can connect to the required HP 3PAR Storage System
from the CLI command window.
RME5135: ERROR: createvlun
operation failed. 5135
The removevv operation has failed.
• Verify that you can connect to the required HP 3PAR Storage System
from the CLI command window.
RME5136: ERROR: removevv
operation failed. 5136
The showvv operation has failed.
• Verify that you can connect to the required HP 3PAR Storage System
from the CLI command window.
RME5137: ERROR: showvv
operation failed. 5137
The createsv operation has failed.
• Verify that you can connect to the required HP 3PAR Storage System
from the CLI command window.
RME5138: ERROR: createsv
operation failed. 5138
The promotesv operation has failed.
•
Verify that you can connect to the required HP 3PAR Storage System
from the CLI command window.
RME5139: ERROR: promotesv
operation failed. 5139
The showhost operation has failed.
•
Verify that you can connect to the required HP 3PAR Storage System
from the CLI command window.
RME5142: ERROR: showhost
operation failed. 5142
The showvlun operation has failed.
•
Verify that you can connect to the required HP 3PAR Storage System
from the CLI command window.
RME5143: ERROR: showvlun
operation failed. 5143
The license for a Recovery Manager component appears to have
expired. RME5144: ERROR: 3PAR
component> license has 5144
• Verify that there is not a communications problem by connecting to
the required HP 3PAR Storage System from the CLI command window.
expired. Contact 3PAR
representatives to acquire a new
license.
•
Check the validity of the Recovery Manager License for the HP 3PAR
Storage System using the showlicense command.
The licence for Recovery Manager component could not be verified. RME5145: ERROR: Could not
retrieve 3PAR 5145
•
Verify that there is not a communications problem by connecting to
the required HP 3PAR Storage System from the CLI command window.
Manager component> license.
Contact 3PAR representatives to
acquire a valid license.
• Check the validity of the Recovery Manager License for the HP 3PAR
Storage System using the showlicense command.
The selected virtual copy has already been mounted to the specified
host. RME5146: ERROR: Datastore
‘’ is already
mounted to host '’. 5146
105