Typical hardware configurations – HP UPS Management Modules User Manual
Page 9
Overview 9
Hardware and software Suggested minimum requirements
VMware ESX Server 3.0.3¹
VMware ESX Server 2.5.5¹
Operating system (64-bit)
Microsoft® Windows Server® 2008 R2 Standard, Enterprise, and Datacenter
Editions
Microsoft® Windows Server® 2008 R1 Standard, Enterprise, and Datacenter
Editions
Microsoft® Windows Server® 2003 R2 Standard and Enterprise Editions
Microsoft® Windows Server® 2003 R1 Standard and Enterprise Editions
Red Hat Enterprise Linux 5 for Itanium® with Update 3
Red Hat Enterprise Linux 5 for AMD64 and Intel® EM64T with Update 3
SUSE Linux Enterprise Server 10 for AMD64 and Intel® EM64T with Service
Pack 3
SUSE Linux Enterprise Server 10 for Itanium® with Service Pack 3
SUSE Linux Enterprise Server 11 for AMD64 and Intel® EM64T
SUSE Linux Enterprise Server 11 for Itanium®
HP-UX 11i v2 (11.23) and v3 (11.31) with the latest patch bundle²
¹ Only supported with the UPS Power Protection Agent version 4.5.
² For the latest updates of HP-UX patches, see the HP Patch Firmware Database website
Typical hardware configurations
The management module can be attached in any of the following configurations:
•
)—UPS connected serially to devices that monitor, manage, and control
the UPS
•
)—UPS connected to devices that monitor the UPS over the network.
•
)—UPS connected serially to devices that monitor, manage, and control
the UPS, and connected to devices that monitor the UPS over the network
•
)—Redundant UPS configuration with serial connections
•
)—Redundant UPS configuration with network connections
•
)—Redundant UPS configuration with serial and network connections
•
)—Redundant UPS configuration with dual subnet