HP UPS Management Modules - Manual (Page 32)

Installing the HP UPS Power Protection Agent 32
9. Click Finish to complete the install wizard and continue with the configuration process.
NOTE: It might take a moment for the configuration screen to appear. If there are open
windows on the desktop, you might need to minimize the windows to view the configuration
screen.
10. Enter the valid host name, IP address, or communications port of the management module in the
Management Server 1 field. This setting ensures that a particular management module executes
commands and operating system shutdowns on the computer running the agent.
If security is not a concern, leave this field blank.
11. To enable a redundant configuration, enter the host name, IP address, or communications port of the
second management module in the Management Server 2 field.
IMPORTANT: If you are configuring redundant management modules, do not select Any
Server in either dropdown box. An IP address for each management module must be entered.