HP NC373F PCI-E Multifunction 1000SX Gigabit Server Adapter User Manual
Page 7
Overview 7
•
If CHAP is used with SLES10 for the root disk, the same CHAP user name and password must be
used for all additional data disks being connected to the system. This is a limitation on the SLES10
open-iscsi initiator.
•
If the RBSU utility is used to reset system defaults, the iSCSI boot parameters will be lost. You will
need to rerun the DOS EV utility or the Linux ibootcfg utility to reset the parameters.
This manual is related to the following products:
- NC373T PCI Express Multifunction Gigabit Server Adapter NC370F PCI-X Multifunction Gigabit Server Adapter NC370T PCI-X Multifunction Gigabit Server Adapter NC371i Integrated PCI-X Multifunction Gigabit Server Adapter NC380T PCI-E Dual Port Multifunction Gigabit Server Adapter NC374m PCI Express Dual Port Multifunction Gigabit Server Adapter NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter