HP NC373F PCI-E Multifunction 1000SX Gigabit Server Adapter - Manual (Page 34)

Uninstalling the RPM packages 34
Uninstalling the RPM packages
Uninstalling linux-iSCSI-install RPM
To remove the install RPM packages, complete the following on the install sever.
For RH4 and SLES 9
1. Prior to removing the linux-iscsi-boot RPM on a server that is not iSCSI booted, stop all iSCSI
sessions, stop the iscsid daemon, and unload the following iscsi modules
iscsi_sfnet
scsi_transport_iscsi
iscsi
2. To uninstall the iSCSI install RPM, execute the following on the install server:
#rpm -e linux-iscsi-install
Uninstalling hp-iSCSI-boot install RPM
For RH5 and SLES 10
To uninstall the iSCSI install RPM, execute the following on the install server:
# rpm -e hp-iscsi-boot