HP BladeSystem Dual NC370i Multifunction Network Adapter User Manual
Page 13
Configuration 13
5.
Click the RDMA Enabled Devices tab to view the configured RDMA device.
6.
Click OK to save the new RDMA device configuration. The following window appears.
7.
Click Yes to continue with the configuration. The following window appears.
8.
Click Yes to reboot the system. The Multifunction Server Adapter is now configured for RDMA
functionality.
After a Multifunction Server Adapter is enabled as an RDMA device, the device is displayed on the
RDMA Enabled Devices tab off the NCU Main window.
NOTE: When RDMA is enabled, multi-threaded applications may have reduced performance, such
as limited system resources or a lack of system responsiveness. No error message appears if this
situation occurs.
This manual is related to the following products:
- NC380T PCI-E Dual Port Multifunction Gigabit Server Adapter NC374m PCI Express Dual Port Multifunction Gigabit Server Adapter NC373F PCI-E Multifunction 1000SX Gigabit Server Adapter NC373T PCI Express Multifunction Gigabit Server Adapter NC370T PCI-X Multifunction Gigabit Server Adapter NC370F PCI-X Multifunction Gigabit Server Adapter NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter