HP BladeSystem Dual NC370i Multifunction Network Adapter User Manual
Page 10
Configuration 10
1.
On the NCU Main window, select an HP Multifunction Server Adapter. The Properties option
appears.
NOTE: HP BladeSystem servers report an IO Bay number instead of a Slot number.
2.
Click Properties. The Multifunction Adapter Properties window appears with the Settings tab
selected.
3.
Select the Enable Remote Direct Memory Access (RDMA) checkbox. (Optional: Type a user-defined
MAC address to be used for the RDMA device in the Locally Administered Address text box. The
default MAC address is used if an address is not entered.)
An available RDMA Pack license is required. See the HP ProLiant Essentials value pack licenses
section.
This manual is related to the following products:
- NC380T PCI-E Dual Port Multifunction Gigabit Server Adapter NC374m PCI Express Dual Port Multifunction Gigabit Server Adapter NC373F PCI-E Multifunction 1000SX Gigabit Server Adapter NC373T PCI Express Multifunction Gigabit Server Adapter NC370T PCI-X Multifunction Gigabit Server Adapter NC370F PCI-X Multifunction Gigabit Server Adapter NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter