HP XP RAID Manager Software - Manual (Page 74)

This command creates pairs for all LU designated as Oradb in the configuration definition file (two
pairs for the configuration in above figure).
•
Designate a volume name (oradev1) and a remote instance P-VOL a case.
# paircreate -g Oradb -d oradev1 -f never -vr
This command creates pairs for all LUs designated as oradev1 in the configuration definition file
(CL1-A,T1,L1 and CL1-D,T2,L1 for the configuration in above figure).
•
Designate a group name and display pair status.
# pairdisplay -g Oradb
Group PairVol(L/R) (P,T#,L#), Seq#, LDEV#.. P/S, Status, Fence, Seq#, P-LDEV# M
oradb oradev1(L) (CL1-D, 2,1) 30053 19.. S-VOL COPY NEVER , ----- 18 -
oradb oradev1(R) (CL1-A, 1,1) 30053 18.. P-VOL COPY NEVER , 30053 19 -
oradb oradev2(L) (CL1-D, 2,2) 30053 21.. S-VOL COPY NEVER , ----- 20 -
oradb oradev2(R) (CL1-A, 1,2) 30053 20.. P-VOL COPY NEVER , 30053 21 -
The command device is defined using the system raw device name (character-type device file
name). For example, the command devices for the following figures would be:
•
HP-UX:
HORCM_CMD of HOSTA = /dev/rdsk/c0t0d1 HORCM_CMD of HOSTB = /dev/rdsk/c1t0d1 HORCM_CMD of HOSTC
= /dev/rdsk/c1t0d1 HORCM_CMD of HOSTD = /dev/rdsk/c1t0d1
•
Solaris:
HORCM_CMD of HOSTA = /dev/rdsk/c0t0d1s2 HORCM_CMD of HOSTB = /dev/rdsk/c1t0d1s2 HORCM_CMD of
HOSTC = /dev/rdsk/c1t0d1s2 HORCM_CMD of HOSTD = /dev/rdsk/c1t0d1s2
For Solaris operations with RAID Manager version 01-09-03/04 and higher, the command
device does not need to be labeled during format command.
•
AIX:
HORCM_CMD of HOSTA = /dev/rhdiskXX HORCM_CMD of HOSTB = /dev/rhdiskXX HORCM_CMD of HOSTC =
/dev/rhdiskXX HORCM_CMD of HOSTD = /dev/rhdiskXX
where XX = device number automatically created by AIX
•
Tru64 UNIX:
HORCM_CMD of HOSTA = /dev/rrzbXXc HORCM_CMD of HOSTB = /dev/rrzbXXc HORCM_CMD of HOSTC =
/dev/rrzbXXc HORCM_CMD of HOSTD = /dev/rrzbXXc
where XX = device number defined by Tru64 UNIX
•
DYNIX/ptx™:
HORCM_CMD of HOSTA = /dev/rdsk/sdXX HORCM_CMD of HOSTB = /dev/rdsk/sdXX HORCM_CMD of HOSTC =
/dev/rdsk/sdXX HORCM_CMD of HOSTD = /dev/rdsk/sdXX
where XX = device number defined by DYNIX
•
Windows 2012/2008/2003/2000:
HORCM_CMD of HOSTA = \\.\CMD-Ser#-ldev#-Port# HORCM_CMD of HOSTB = \\.\CMD-Ser#-ldev#-Port#
HORCM_CMD of HOSTC = \\.\CMD-Ser#-ldev#-Port# HORCM_CMD of HOSTD = \\.\CMD-Ser#-ldev#-Port#
•
Linux, z/Linux:
HORCM_CMD of HOSTA = /dev/sdX HORCM_CMD of HOSTB = /dev/sdX HORCM_CMD of HOSTC = /dev/sdX
HORCM_CMD of HOSTD = /dev/sdX
where X = disk number defined by Linux, z/Linux
•
IRIX64:
HORCM_CMD for HOSTA ... /dev/rdsk/dks0d0l1vol or /dev/rdsk/node_wwn/lun1vol/c0p0
HORCM_CMD for HOSTB ... /dev/rdsk/dks1d0l1vol or /dev/rdsk/node_wwn/lun1vol/c1p0
HORCM_CMD for HOSTC ... /dev/rdsk/dks1d0l1vol or /dev/rdsk/node_wwn/lun1vol/c1p0
HORCM_CMD for HOSTD ... /dev/rdsk/dks1d0l1vol or /dev/rdsk/node_wwn/lun1vol/c1p0
74 Sample configuration definition files