HP XP RAID Manager Software - Manual (Page 30)

Using RAID Manager with Hitachi and other storage systems
Table 11 (page 30) shows the related two controls between RAID Manager and the RAID storage
system type (Hitachi or HP XP). Figure 6 (page 31) shows the relationship between the application,
CCI, and RAID storage system.
•
The following common API/CLI commands are rejected with EX_ERPERM(*1) by connectivity
of CCI with RAID storage system:
horctakeover
paircurchk
paircreate
pairsplit
pairresync
pairvolchk
pairevtwait
pairdisplay
raidscan (except -find option only), raidar
raidvchkset
raidvchkdsp
raidvchkscan
•
The following XP API/CLI commands are rejected with EX_ERPERM(*2) on HITACHI storage
system even when both CCI and Raid Manager XP (provided by HP) are installed:
pairvolchk -s
pairdisplay -CLI
raidscan -CLI
paircreate -m noread for Continuous Access Synchronous
paircreate -m dif/inc for Business Copy
Table 11 Relationship between CCI and RAID storage system
XP API/CLI Common API/CLI RAID system Installation order CCI version
Cannot use (except
CLI) Enable Hitachi RAID Manager CCI 01-08-03/00 or
higher
EX_ERPERM
1
HP XP
Enable Hitachi Install CCI after installing
RAID Manager XP
Enable HP XP
Enable Enable HP XP RAID Manager XP RAID Manager XP
01.08.00 or higher
(provided by XP)
EX_ERPERM
2
EX_ERPERM
1
Hitachi
Enable Enable HP XP Install RAID Manager XP
after installing CCI
EX_ERPERM
2
Enable Hitachi
30 Installation requirements