HP 4100 Enterprise Virtual Array - Manual (Page 33)

4. If the logon page does not reappear after several minutes, re-browse to the WOCP to log in.
Service options (page help)
Controller last fault
Review the events associated with a controller’s last fault. See also capturing service data .
View message logs
Review the log of WOCP events. See also capturing service data .
User options (page help)
Launch HP Command View EVA
Run HP Command View EVA in a separate window.
Considerations
• You can enter either the IP address or the computer network name of the server on which HP
Command View EVA is installed.
Procedure
1. Enter the IP address or computer network name.
2. Click Launch Command View EVA. The logon window appears.
3. Enter the security credentials for accessing HP Command View EVA.
Network options
View the internet protocol settings for accessing the WOCP.
Properties
Management Server Internet Protocol V4
(IPV4) Property
Description/Comments
Network Node Name Computer network name of the management module
within the HP EVA storage system.
IP Address
Internet Protocol (IP) address of the management
module, expressed in IPv4 dotted-decimal notation.
Example: 12.113.42.101.
Gateway Server IP address of the subnetwork gateway server (if any),
expressed in IPv4 dotted-decimal notation.
Subnet Mask
Subnetwork IP address range (if any), expressed in IPv4
dotted-decimal notation.
DNS Servers IP address of domain name servers (if any), expressed
in IPv4 dotted-decimal notation.
System information
View the HP EVA storage system properties.
EVA Web-based Operator Control Panel 1.0 33