HP LaserJet 5200 Printer series - Manual (Page 58)

To turn the Sleep mode on or off
1. Press Menu to open the menus.
2. Press to highlight CONFIGURE DEVICE, and then press .
3. Press to highlight RESETS, and then press .
4. Press to highlight SLEEP MODE, and then press .
5. Press or to select ON or OFF, and then press .
6. Press Menu to exit the menu.
Personality
This printer features automatic personality (printer-language) switching.
● AUTO: Configures the printer to automatically detect the type of print job and configure its
personality to accommodate that job.
● PCL: Configures the printer to use Printer Control Language.
● PDF: Configures the printer to use portable document format.
● PS: Configures the printer to use PostScript emulation.
To set the personality
1. Press Menu to open the menus.
2. Press to highlight CONFIGURE DEVICE, and then press .
3. Press to highlight SYSTEM SETUP, and then press .
4. Press to highlight PERSONALITY, and then press .
5. Press or to select the appropriate personality, and then press .
6. Press Menu to exit the menu.
Clearable warnings
Use this feature to determine the display time of control-panel clearable warnings by selecting ON or
JOB. The default value is JOB.
● ON: Clearable warnings appear until you press .
● JOB: Clearable warnings appear until the end of the job for which they were generated.
To set the clearable warnings
1. Press Menu to open the menus.
2. Press to highlight CONFIGURE DEVICE, and then press .
3. Press to highlight SYSTEM SETUP, and then press .
4. Press to highlight CLEARABLE WARNINGS, and then press .
44 Chapter 2 Control panel ENWW