Dropouts, Lines, Dropouts lines – HP LaserJet 5200 Printer series User Manual
Page 170
Specks might appear on a page after a jam has been cleared.
1.
Print a few more pages to see if the problem corrects itself.
2.
Clean the inside of the printer and run a cleaning page to clean the fuser. (See
.)
3.
Try using a different type of media.
4.
Check the print cartridge for leaks. If the print cartridge is leaking, replace it.
Dropouts
1.
Make sure that the environmental specifications for the printer are being met. (See
2.
If the media is rough, and the toner easily rubs off, open the CONFIGURE DEVICE menu at the
printer control panel. Open the PRINT QUALITY submenu, select FUSER MODES, and then
select the media type you are using. Change the setting to HIGH1 or HIGH2, which helps the
toner fuse more completely onto the media. (See
.)
3.
Try using a smoother media.
Lines
A
A
A
A
A
B
B
B
B
B
C
C
C
C
C
a
a
a
a
a
c
c
c
c
c
b
b
b
b
b
1.
Print a few more pages to see if the problem corrects itself.
2.
Clean the inside of the printer and run a cleaning page to clean the fuser. (See
.)
3.
Replace the print cartridge.
156
Chapter 7 Problem solving
ENWW