HP LaserJet 5200 Printer series - Manual (Page 148)

Control panel message Description Recommended action
Clearing paper path The printer jammed or detected misplaced
media. The printer is attempting to eject
these pages automatically. No action necessary.
CLOSE TOP COVER AND FRONT DOOR The top cover and front door need to be
closed. Close the top cover and front door.
CODE CRC ERROR An error has occurred during a firmware
upgrade. 1. Reinstall the firmware.
2. If the problem persists, contact
HP Support.
Creating...CLEANING PAGE The printer is generating a cleaning page.
The printer returns to the Ready state after
the cleaning page is printed. 1. Load the cleaning page into tray 1.
2. Press Menu .
3. Select PRINT QUALITY, and then
press
.
4. Select PROCESS CLEANING PAGE,
and then press
.
DATA RECEIVED
alternates with
Ready
The printer received data and is waiting for
a form feed. When the printer receives
another file, the message disappears.
The printer is paused.
If the printer is waiting for a form feed,
press
to continue.
If the printer is paused, press Stop to
continue.
Event Log Empty SHOW EVENT LOG was selected from the
control panel, and the event log is empty. No action necessary.
Genuine HP supplies installed A new HP cartridge has been installed. The
printer returns to the Ready state after
approximately 10 seconds. No action necessary.
GENUINE HP SUPPLIES DESIGNED FOR
alternates with
Ready
This genuine HP supply was not designed
for this printer and is not supported. The
printer can print with this supply, but print
quality might be affected. Replace this supply with a genuine
HP supply that is designed for this printer.
Incorrect The PIN number is incorrect. Contact the network administrator.
INFLATE FAILURE An error has occurred during a firmware
upgrade. 1. Reinstall the firmware.
2. If the problem persists, contact
HP Support.
Initializing This message appears when the printer is
turned on and begins initialization. No action necessary.
Initializing permanent storage This message appears when the printer is
turned on to show that permanent storage
is being initialized. No action necessary.
INSERT OR CLOSE TRAY XX A tray is open and the printer is trying to
print from another tray. Close the tray indicated so that printing can
continue.
INSTALL FUSER
For help press
The fuser is either not installed or not
correctly installed in the printer.
Press for help.
or
134 Chapter 7 Problem solving ENWW