HP LaserJet 5200 Printer series User Manual
Page 145
Control panel message
Description
Recommended action
52.XY ERROR
alternates with
To continue turn off then on
A printer error has occurred.
1.
Press
to continue.
2.
If the message persists, turn the
printer off and then on.
3.
If the message persists, contact
HP Support.
53.10.01 ERROR UNSUPPORTED RAM
The memory DIMM is not a supported
DIMM.
.
54.XX ERROR
A printer command error has occurred.
1.
Turn the printer off and then on.
2.
If the message persists, contact
HP support.
55.XX.YY DC CONTROLLER ERROR
alternates with
To continue turn off then on
The engine is not communicating with the
formatter.
1.
Turn the printer off and then on.
2.
If the message persists, contact HP
Support.
56.XX ERROR
alternates with
To continue turn off then on
An error has occurred.
1.
Turn the printer off and then on.
2.
If the message persists, contact HP
Support.
57.XX PRINTER ERROR
alternates with
To continue turn off then on
A printer fan error has occurred.
1.
Turn the printer off and then on.
2.
If the message persists, contact
HP Support.
58.XX ERROR
alternates with
To continue turn off then on
An error has occurred in which a memory
tag CPU was detected.
1.
Press
to view step-by-step
information.
2.
Turn the printer off and then on.
3.
If the message persists, contact HP
Support.
4.
To exit, press .
59.XY ERROR
alternates with
To continue turn off then on
A printer motor error has occurred.
1.
Turn the printer off and then on.
2.
If the message persists, contact
HP Support.
NOTE
This message might
also appear if the transfer unit
is missing or incorrectly
installed. Ensure that the
transfer unit is correctly
installed.
62 NO SYSTEM
No system was found.
1.
Turn the printer off and then on.
2.
If the message persists, contact
HP Support.
64 ERROR
A scan buffer error has occurred.
1.
Turn the printer off and then on.
2.
If the message persists, contact
HP Support.
ENWW
Control-panel messages
131