HP Integrity rx4640 Server - Manual (Page 40)

Deploying Integrity Support Packs in Microsoft Windows
8. Deploy all components displayed in the target computer list by clicking Install after
the RDU identifies the target system. A progress window tracks the progress of the
deployment.
9. Click Cancel at any time to stop deployment. There might be a slight delay
before the installation is canceled while the RDU finishes the last initiated task.
IMPORTANT: Clicking Cancel does not cancel the entire installation procedure and restore the
target system to its previous driver versions. Instead, clicking Cancel stops the installation of the
ISP at the point when Cancel is clicked, and the target server might end up with a partially installed
ISP.
10. View the installation results. When the deployment process is complete, after deploying
the ISP on the target server, the RDU displays an installation confirmation screen.
If one or more components are not installed successfully, a screen similar to the
following appears.
Figure 2-17: Installation failure
Each component writes installation activity (including errors) to a common
installation log file called CPQSETUP.LOG on every target server. To view
the installation log file, select Target from the menu bar and select View
Installation Log, or click View target installation log on the Target toolbar.
2-30 HP Integrity Support Pack and Deployment Utilities User Guide