Component preconfiguration, Component preconfiguration -10 – HP Integrity rx4640 Server User Manual
Page 20

Deploying Integrity Support Packs in Microsoft Windows
To view the properties of a component, right-click the component and select Properties, or
click the properties icon (
) on the Repository toolbar. The Properties window displays the
properties of
ncluding file name, version number, and operating
system information. A sample Properties window is shown in Figure 2-3.
the component or ISP, i
Figure 2-3: Sample properties
Component Preconfiguration
Some of the Smart Components included as part of an ISP must be configured before being
deployed. If any components require configuration, the All Configurable Components folder
in the repository view tree appears in bold text.
IMPORTANT: Components must be configured only once. The configuration information is stored
inside each Smart Component so that it is available when the component is installed. You do not need
to configure components each time they are deployed. However, configuration is independent of the
target computer you select. If you change the configuration of a component after deployment, you must
redeploy the component.
2-10
HP Integrity Support Pack and Deployment Utilities User Guide
- Integrity rx7620 Server Integrity rx2660 Servers Integrity rx6600 Server Integrity Superdome sx2000 Server Integrity rx7640 Server Integrity rx3600 Server Integrity rx8620 Server Integrity rx2600 Servers Integrity rx5670 Server Integrity rx8640 Server Integrity Superdome sx1000 Server Integrity BL860c Server-Blade Integrity rx1620 Servers Integrity rx2620 Servers