HP Integrity rx4640 Server - Manual (Page 33)

Deploying Integrity Support Packs in Microsoft Windows
Command Line Examples
The following table lists examples of command line input for single-component installation.
NOTE: Although lowercase letters are used in these examples, either uppercase or lowercase letters
can be used.
Table 2-7: Examples of Single-Component Installations
Command Line Input Result
cp002575
Starts installation of the CP002575.EXE component.
cp002575 /s
Installs the CP002575.EXE component on the target server, using the
defaults of the component. The GUI does not appear.
cp002575 /s /f /r
Installs the CP002575.EXE component, forcing the component to
install over an existing version and allowing the server to reboot
automatically if needed. The GUI does not appear.
Return Codes
When each Smart Component has finished running, the component reports a return code to
the operating system or the calling application.
These return codes are used to determine the status of the component installation. You can
also use return codes in a script to control the execution of the script and determine any
branching that is required. Table 2-8 summarizes the Smart Component return codes.
Table 2-8: Return Codes
Error Level Meaning
0 The Smart Component failed to install. Refer to the log file for more details.
1 The Smart Component installed successfully.
2 The Smart Component installed successfully, but the system must be restarted.
3 The installation was not attempted because the required hardware was not
present or the software was current.
HP Integrity Support Pack and Deployment Utilities User Guide 2-23