HP Integrity rx4640 Server - Manual (Page 28)

Deploying Integrity Support Packs in Microsoft Windows
Command Line Arguments
The following table lists the arguments recognized by the Remote Deployment
Console Utility.
Table 2-4: Command Line Arguments
Command Line Argument Description
/help
Displays command line Help information.
/?
Is identical to the /help argument.
/use-latest
Instructs SETUPC to automatically install the latest
available Support Pack for the target operating
system. Any additional components or Support
Packs passed on the command line are ignored.
“Latest available” means the latest available version
for the target operating system that can be found in
either the file share specified by the
/use-location parameter or in the directory
containing SETUPC.EXE.
/t[arget]:computer
Specifies the name of the computer to use as the
target for the deployment operation.
/f[orce]
Changes the behavior of a component installation in
one of the following ways:
• If the component is already installed and
current, it will reinstall itself, and the installed
version number will remain the same.
• If a newer version of the component is already
installed, the component will install itself and
downgrade the component to the older version
number.
/r[eboot][:timeout]
Causes the target system to reboot if the installation
requires a reboot to complete installation. A timeout
in seconds can be specified. The default timeout is
15 seconds.
The timeout value must be between 15 and 3600
(1 hour).
The reboot will only take place if no installation
errors occur.
/reboot-always[:timeout]
Causes the target system to reboot after
installation, even if a reboot is not required to
complete installation. A timeout in seconds can
be specified. The default timeout is 15 seconds.
The timeout value must be between 15 and 3600
(1 hour).
continued
2-18 HP Integrity Support Pack and Deployment Utilities User Guide